| |
SUNCOTEX
MATT is a sand textured
wall finish that can last for years retaining
its protective property. It is a long
lasting, reliable, durable and protective
exterior coating that can withstand any
kind of climatic extremes and atmospheric
pollution.
|
|
When conventional paints are applied,
hair line cracks are likely to develop
after sometime and the paint peels off
and cracks widen. The flexible and adhesive
properties of the special polymer used
in SUNCOTEX
MATT, however helps bridge
the cracks as it moves with the changing
temperature. It adheres well to any surface
that it is applied and provides a thick,
tough, weather resistant, light fast durable
coating, to solve any exterior problem.
|
Formulation:
SUNCOTEX MATT
has a unique formulation - a blend of finest
aggregates, a special thermoplastic resin with
better flexibility nd adhesive properties, selected
pigments, high percentage of Titanium Dioxide
and other constituents that provide a thick,
tough, weather resistant, light fast and durable
coating to solve any exterior decorative problem.
Mixing
Instructions:
SUNCOTEX MATT is a ready to use paint.
Stir vigorously the contents in the container
before use. Dilution of the paint is normally
not required. Upto 500 ml of clean water to
4 lit. of SUNCOTEX
MATT may be added when the backing
is absorbent or during hot weather.
Application
:
SUNCOTEX MATT
may be applied by brush or roller. A 10 cm (4")
broad, good quality paint brush is recommended
for SUNCOTEX MATT
work. Soak the brush in water before use. Keep
the brush well loaded with SUNCOTEX
MATT and spread it evenly on
the surface. Maintain a flowing edge. The brush
and the equipments should be cleaned with water
immediately after use.
Unique
Properties:
When conventional paints are applied, hair cracks
are likely to develop after sometime and the
paint peels ott and the cracks widen. The flexible
and adhesive properties of the special polymer
used in SUNCOTEX
MATT, however, help bridge the
cracks as it moves with the changing temperatures.
Covering
Capacity:
Covering Capacity of SUNCOTEX
MATT depends on the porosity
and texture of the surface.
On smooth, non-absorbent surface coverage will
be approximately 6.5 sq.mt. per litre for single
coat and approximately 3.3 sq.mts. per litre
for 2 coats.
Coverage wiil be reduced on rough surfaces where
it is suggested for the sake of economy and
ease of application that one coat of Suncem
Cement Paint be applied as a primer coat followed
by one coat of SUNCOTEX
MATT.
SUNCOTEX MATT
should not be applied in rain and frost.
Adherence
to Any Surface:
SUNCOTEX MATT
is ideal for all surfaces: - cement sand renderings,
cement lime sand rendering, roughcast, pebble
dash, concrete, insulating board, concrete bricks
and blocks, light weight concrete, asbestos
cement sheets, shack and fencing bricks, asphalted
or bituminous surfaces, etc. On surfaces such
as ferrous metals, brass, copper and phosphor
bronze, a protective coating of a suitable bituminous
compound or chromated red oxide should be given.
New wood should be treated with a leafing grade
aluminium primer or water based acrylic emulsion
primer.
